How to lift a car?

To lift a car, you can follow these general steps:
  1. Choose a Safe Location: Find a flat and stable surface away from traffic to safely lift your car.
  2. Gather the Necessary Tools: Ensure you have the appropriate tools, including a jack, jack stands, wheel chocks, and a lug wrench.
  3. Position the Wheel Chocks: Place wheel chocks on the opposite side of the car from where you intend to lift it to prevent it from rolling.
  4. Locate the Jacking Points: Consult your vehicle's manual to identify the proper jacking points. These are reinforced areas on the vehicle's frame where it is safe to lift.
  5. Use the Jack to Lift the Car: Position the jack under the designated jacking point and pump the handle or use the electric controls to raise the car. Lift it high enough to allow for the desired work to be done.
  6. Secure the Car with Jack Stands: Once the car is lifted, place jack stands under the appropriate jacking points. Slowly lower the car onto the jack stands until it is securely supported.
  7. Test Stability: Give the car a gentle shake to ensure that it is stable and securely supported by the jack stands.
  8. Perform the Necessary Work: With the car lifted and secured, you can now perform the desired maintenance or repair tasks.
  9. Lower the Car: Once the work is completed, carefully raise the car slightly using the jack stands. Remove the jack stands one at a time and slowly lower the car back down to the ground.
  10. Tighten Lug Nuts: After the car is on the ground, use a lug wrench to fully tighten the lug nuts on the wheels.

Remember, these steps provide a general overview of how to lift a car. Always consult your vehicle's manual for specific instructions and safety guidelines. If you are unsure or uncomfortable with lifting a car, it is recommended to seek assistance from a professional or experienced individual.

Back to blog

Leave a comment