- Find a Safe Location: If you experience a flat tire while driving, safely pull over to a location away from traffic. Choose a flat and stable surface to change the tire.
- Engage Safety Measures: Turn on your hazard lights to alert other drivers. Apply the parking brake to prevent the vehicle from rolling.
- Gather Tools and Spare Tire: Locate the necessary tools, including a jack, lug wrench, and spare tire. These tools are typically provided with the vehicle. Ensure that the spare tire is properly inflated.
- Loosen Lug Nuts: Use the lug wrench to loosen the lug nuts on the flat tire. Loosen them by turning counterclockwise, but do not remove them completely at this stage.
- Position the Jack: Consult your vehicle's manual to identify the proper jack points. Place the jack in the correct position under the vehicle's frame or designated lifting point.
- Lift the Vehicle: Use the jack to raise the vehicle until the flat tire is off the ground. Ensure that the vehicle is stable and secure before proceeding.
- Remove the Lug Nuts and Flat Tire: Completely remove the loosened lug nuts and carefully take off the flat tire from the wheel hub.
- Mount the Spare Tire: Align the spare tire with the wheel hub and push it onto the hub until it fits snugly. Hand-tighten the lug nuts as much as possible.
- Lower the Vehicle: Use the jack to lower the vehicle until the spare tire touches the ground. Remove the jack and fully tighten the lug nuts in a star or crisscross pattern.
- Check the Tire Pressure: After changing the tire, check the tire pressure of the spare tire using a tire gauge. Adjust the pressure if necessary.
Tire changing steps
Here is a step-by-step guide on how to change a tire based on the information from the search results: