Two post lift installation

Installing a two-post car lift in your garage requires careful planning and attention to detail to ensure safety and proper functionality. Here's a general overview of the installation process:

  1. Choose the Right Location: Select a suitable location in your garage with enough space for the lift and maneuvering vehicles. Ensure that the floor is level and strong enough to support the weight of the lift and vehicles.

  2. Check Ceiling Height: Measure the ceiling height to ensure it can accommodate the height of the raised vehicles. Allow for additional clearance above the lift for safety.

  3. Prepare the Garage Floor: Clear the area where the lift will be installed. Clean the floor and remove any obstacles or debris. If the floor is uneven, consider leveling it to ensure stability.

  4. Anchor the Lift: Most two-post lifts require anchoring to the concrete floor for stability and safety. Follow the manufacturer's instructions for drilling holes and securing the lift's posts to the floor using anchor bolts.

  5. Assemble the Lift: Follow the assembly instructions provided by the manufacturer to assemble the lift components. This typically involves attaching the posts, arms, crossbeams, hydraulic cylinders, and other parts according to the provided diagrams and instructions.

  6. Install Hydraulic System: Connect the hydraulic hoses, pump, and other components according to the manufacturer's instructions. Make sure all connections are tight and secure.

  7. Test the Lift: Before using the lift, perform a thorough inspection and test to ensure that all components are installed correctly and functioning properly. Test the lift's operation with an unloaded vehicle to check for smooth movement and stability.

  8. Professional Inspection: Consider hiring a professional to inspect the installed lift for safety and compliance with local regulations. They can also provide guidance on proper operation and maintenance.

  9. Safety Precautions: Make sure to follow all safety guidelines provided by the manufacturer, including weight capacity limits, proper positioning of vehicles on the lift, and use of safety locks and restraints.

  10. Regular Maintenance: Follow the manufacturer's recommendations for regular maintenance and inspection of the lift to ensure safe and reliable operation.

It's essential to carefully follow the manufacturer's instructions and any local regulations or building codes when installing a two-post car lift in your garage. If you're unsure about any aspect of the installation process, consider consulting a professional installer or technician for assistance.

Back to blog

Leave a comment