4 Post Lift Operation Procedure
-
Preparation:
- Ensure the lift area is clear of debris and other vehicles.
- Check the lift for any signs of damage or wear before use.
- Make sure the vehicle is properly positioned and centered on the lift platforms.
-
Positioning the Vehicle:
- Drive the vehicle onto the lift, aligning the wheels with the designated spots on the platforms.
- Apply the parking brake and turn off the engine.
- If necessary, chock the wheels to prevent any movement.
-
Operating the Lift:
- Stand at the control panel and ensure all safety locks are engaged.
- Slowly raise the lift to the desired height, keeping an eye on the vehicle to ensure it remains stable.
- Once at the desired height, engage the safety locks to secure the lift in position.
-
Working Under the Vehicle:
- Before starting any work, double-check that the safety locks are engaged.
- Use appropriate safety equipment, such as safety glasses and gloves.
- Avoid placing any part of your body under the vehicle unless absolutely necessary.
-
Lowering the Lift:
- Once the work is complete, ensure all tools and equipment are clear of the lift area.
- Disengage the safety locks and slowly lower the lift to the ground.
- Keep an eye on the vehicle to ensure it remains stable during the descent.
-
Final Checks:
- Once the lift is fully lowered, remove any wheel chocks and release the parking brake.
- Inspect the lift for any signs of damage or wear.
- Clean the lift area and store any tools and equipment properly.
Always follow the manufacturer's guidelines and safety protocols specific to your 4 post lift model. Safety is paramount when operating heavy machinery.