How to change tire?

To change a tire, you can follow these general steps:
  1. Find a Safe Location: Pull over to a safe area away from traffic. Ensure that the ground is solid and level to prevent the car from rolling.
  2. Engage Safety Measures: Turn on your hazard lights and engage the parking brake to increase visibility and prevent the vehicle from moving.
  3. Prepare the Tools: Gather the necessary tools, including a spare tire, lug wrench, and jack. These tools are typically provided with the vehicle.
  4. Loosen Lug Nuts: Use the lug wrench to loosen the lug nuts on the flat tire. Loosen them by turning counterclockwise, but do not remove them completely at this stage.
  5. Position the Jack: Consult your vehicle's manual to identify the proper jacking points. Place the jack in the correct position under the vehicle's frame or designated lifting point.
  6. Lift the Vehicle: Use the jack to raise the vehicle until the flat tire is off the ground. Ensure that the vehicle is stable and secure before proceeding.
  7. Remove the Lug Nuts and Flat Tire: Completely remove the loosened lug nuts and carefully take off the flat tire from the wheel hub.
  8. Mount the Spare Tire: Align the spare tire with the wheel hub and push it onto the hub until it fits snugly. Hand-tighten the lug nuts as much as possible.
  9. Lower the Vehicle: Use the jack to lower the vehicle until the spare tire touches the ground. Remove the jack and fully tighten the lug nuts in a star or crisscross pattern.
  10. Check the Tire Pressure: After changing the tire, check the tire pressure of the spare tire using a tire gauge. Adjust the pressure if necessary.
Remember, these steps provide a general overview of how to change a tire. Always consult your vehicle's manual for specific instructions and safety guidelines. If you are unsure or uncomfortable with changing a tire, it is recommended to seek assistance from a professional or roadside assistance service.
Back to blog

Leave a comment