As a mechanic in the automotive repair, maintenance, and tuning sector, you are as good as the pieces of equipment in your possession. Among the equipment you can invest in with a guarantee to make operations in your premises more comfortable is the car lift. You need to know how to use a car lift if you are to make worthy of your stint in your workplace.
The car lift is the implement that you use to raise vehicles to a certain altitude. The purpose of the lift is usually to provide a wide area for accessibility in the repair and tuning of the car. It beats shortcomings such as visibility and the risk of knocking over, which is common in auto-engineering.
The lift might also be used for parking purposes where the elevation creates more room for the accommodation of other vehicles. This use is extensive for premises that have a high vehicle capacity.
There are several types of car lifts in the market, coming with a wide variety of features to meet various needs. They include the four-post lift, two-post lift, and portable automotive lift, among many others.
How To Use A Car Lift : Step By Step Guide
When you get equipment for your garage, you need to know how to operate it for it to meet its purposes. The same applies to the automotive elevator. Once you get it and have it installed, you need to know how to operate it, focusing on safety measures as a slight hitch can spell perilous results.
As a proficient mechanic, the following are the steps on how to use the car elevator.
Step 1
Slowly drive the car to the lifting platform and shift the transmission to neutral. Lock all doors and ensure there is nobody inside the vehicle before the lift. Look out for overhead installations that may come in the way of the elevation, such as antennas and car overhead racks. If your premises have a lower height reach, which may interfere with the installations, you may consider temporarily uninstalling them before the elevation.
Step 2
For the second step, you need to secure the wheels or the elevator’s arms to the respective points of attachment. Here you need to focus on the type of car lift you have. The two post-car lift lifting points depend on whether the elevator is symmetrical or asymmetrical.
Fasten the arms to the base of the car and confirm to ensure it’s stable. The two-post lift can be tricky to operate, and you need to ensure the vehicle is at the proper center of balance.
What Is The Procedure To Lift A Vehicle On A Four Post Lift?
Using the four-post lift is easy as you set the car on the rainy platform and ensure the chocks are in place for the vehicle not to slip during the elevation. Start raising the lift slowly as a confirmation of the functioning of the chocks and wheel pads.
Step 3
Initiate the lift once you are sure that it is sturdy enough to support the weight of the car. Once raised to the required elevation level, look around to be sure that it is placed right. You can now conduct your tuning on the car, or if for parking purposes, leave it until you need it.
Once the car is above the auto lift, ensure there is no impact or shakes subjected to it as it may lead the car to topple. However, toppling is a rare eventuality if you invest in a robust car lift. Always countercheck with the chocks or locking mechanism for the stability of the vehicle atop the elevator.
Step 4
The final stage focuses on how to lower the car lift to the ground once done with it. Before lowering the vehicle, ensure there is nothing underneath the platform. Lower it gradually until it reaches the ground.
You can now unlock the locks and chocks, and the vehicle is free to move.
Safety Measures To Adhere To When Using The Car Lift
When using the car lift, you need to know that you are dealing with a load that has a lot of weight. In the event of any miscalculation, the result may be hazardous. The main danger in this situation is the car falling, which can cause serious injuries or damage to property. The following are some key points to look at to keep accidents at bay when using the car elevator.
Get A Suitable Elevator
The first safety measure lies in the acquisition of the car elevator. As earlier indicated, there are several types of car elevators in the market. As such, you need to have a clear idea of what elevator you want based on the cars you deal in at your garage and also your preference. Also, check on the weight limit of the lift.
Have An Eye For Its Maintenance
Do not forget the maintenance part, as it ensures the car lift is always in its best working integrity. You need to check on it to ascertain that it is working well and that there are no damages to it. You can check if it is damaged by checking for any drips or traces of liquid on the hydraulic chamber.
A worthy move is to acquire the lift from manufacturers that offer free checks up on the elevator, even if it is once a year. At least you have the surety of professional handling of the garage equipment.