Step-by-Step Guide to Using a Tire Changer

Materials Needed:

Steps:

  1. Preparation:

    • Ensure the tire changer is properly secured and stable.
    • Gather all necessary tools and materials.
    • Make sure the tire and wheel are clean and free of debris.

  2. Position the Tire:

    • Place the tire and wheel assembly onto the turntable of the tire changer.
    • Secure the wheel in place using the clamps or locking mechanism provided by the machine.

  3. Break the Bead:

    • Use the bead breaker tool to separate the tire bead from the rim. This tool is usually a part of the tires machine.
    • Position the bead breaker against the sidewall of the tire and apply pressure to break the seal.
    • Repeat this process on both sides of the tire.

  4. Lubricate the Tire (Optional):

    • Apply a tire lubricant to the bead and sidewall of the tire to make the removal process easier.

  5. Remove the Tire:

    • Use the tire iron or pry bar to lift the tire bead over the rim.
    • Work your way around the tire, lifting the bead over the rim until the tire is completely removed from the wheel.

  6. Install the New Tire:

    • Place the new tire onto the wheel, ensuring the bead is aligned with the rim.
    • Use the tire iron or pry bar to push the bead over the rim, working your way around the tire.
    • Apply lubricant if needed to make the process smoother.

  7. Inflate the Tire:

    • Use an air compressor to inflate the tire to the recommended pressure.
    • Ensure the tire bead is properly seated against the rim.

  8. Final Check:

    • Inspect the tire and wheel assembly for any signs of damage or improper seating.
    • Make sure the tire is evenly inflated and the bead is securely seated.

  9. Clean Up:

    • Remove the wheel from the tire changer.
    • Clean any lubricant or debris from the tire and wheel.

  10. Safety Check:

    • Before driving, ensure the tire is properly inflated and securely mounted.
    • Check for any leaks or abnormalities.

Safety Tips:

  • Always wear safety glasses and gloves when working with tires.
  • Ensure the tire changer is properly maintained and in good working condition.
  • Follow the manufacturer's instructions for your specific tire changer machine model.

By following these steps, you should be able to safely and effectively use a tire changer to remove and install tires.

Back to blog

Leave a comment